Pompy ciepła

Filter
Kraj  
Kategoria  
Technologia  
Producent  
  1. Buderus 3 items
  2. CLIVET 16 items
  3. Cooper&Hunter 22 items
  4. Dimplex 18 items
  5. Hoval 2 items
  6. Junkers Bosch 3 items
  7. KNV 8 items
  8. Midea 15 items
  9. NIBE Energy Systems 1 item
  10. Ochsner 17 items
  11. Solarfocus 1 item
  12. Stiebel Eltron 7 items
  13. Vaillant 2 items
  14. Walter Bösch GmbH & Co KG 3 items
  15. Waterkotte 3 items
  16. Weider 1 item
pokaż więcej pokaż mniej
Źródło energii  
Etykieta energetyczna UE  
Moc chłodnicza  
Współczynnik wydajności chłodniczej (COP)  
Moc grzewcza  
Sezonowy COP  
Page
Ustaw kierunek malejący
  1. LI 12TU
    Producent Dimplex

    Heating heat pump for indoor installation with integrated control WPM EconPlus. Sound-optimized by low-speed EC-3D radial fan, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high-performance evaporator, electronic expansion valve and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconPlus). The integrated air duct with 90 ° deflection allows a direct corner installation without air ducts or a wall installation with air ducts on the outlet side. Variable installation by air intake from the rear, flexible air outlet to the right, left or top and the possibility to move the hydraulic connections from right to left. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). Universal design for low-temperature heating systems with flexible expansion options for: Room temperature control via Smart-RTC (optional) bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Dodaj do listy
    Źródło energii
    Elektryczność
    Moc grzewcza
    9.40 kW
    Moc chłodnicza
    0.00 kW
    Etykieta energetyczna UE
    A++
    Sezonowy COP
    5.00
    Współczynnik wydajności chłodniczej (COP)
    4.00 COP
  2. OCHSNER AIR 717 C EAGLE
    Producent Ochsner

    OCHSNER AIR 717 C EAGLE
    Dodaj do listy
    Źródło energii
    Elektryczność
    Moc grzewcza
    17.00 kW
    Moc chłodnicza
    0.00 kW
    Etykieta energetyczna UE
    A++
    Sezonowy COP
    3.00
    Współczynnik wydajności chłodniczej (COP)
    4.10 COP
  3. CH-S12FTXLA

    Heat-pump Arctic Inverter series
    Dodaj do listy
    Źródło energii
    Elektryczność
    Moc grzewcza
    3.67 kW
    Moc chłodnicza
    3.50 kW
    Etykieta energetyczna UE
    A+++
    Sezonowy COP
    5.10
    Współczynnik wydajności chłodniczej (COP)
    4.65 COP
  4. SIW 11TES
    Producent Dimplex

    SIW 11TES
    Dodaj do listy
    Źródło energii
    Elektryczność
    Moc grzewcza
    11.00 kW
    Moc chłodnicza
    0.00 kW
    Etykieta energetyczna UE
    A++
    Sezonowy COP
    3.00
    Współczynnik wydajności chłodniczej (COP)
    5.00 COP
  5. LI 9TU
    Producent Dimplex

    Heating heat pump for indoor installation with integrated control WPM EconPlus. Sound-optimized by low-speed EC-3D radial fan, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high-performance evaporator, electronic expansion valve and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconPlus). The integrated air duct with 90 ° deflection allows a direct corner installation without air ducts or a wall installation with air ducts on the outlet side. Variable installation by air intake from the rear, flexible air outlet to the right, left or top and the possibility to move the hydraulic connections from right to left. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). Universal design for low-temperature heating systems with flexible expansion options for: Room temperature control via Smart-RTC (optional) bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Dodaj do listy
    Źródło energii
    Elektryczność
    Moc grzewcza
    6.80 kW
    Moc chłodnicza
    0.00 kW
    Etykieta energetyczna UE
    A++
    Sezonowy COP
    5.00
    Współczynnik wydajności chłodniczej (COP)
    3.90 COP
  6. CH-S24FTXLA NG

    Heat-pump Arctic Inverter NG series
    Dodaj do listy
    Źródło energii
    Elektryczność
    Moc grzewcza
    7.25 kW
    Moc chłodnicza
    6.70 kW
    Etykieta energetyczna UE
    A+++
    Sezonowy COP
    5.10
    Współczynnik wydajności chłodniczej (COP)
    4.19 COP
  7. CH-S09FTXAM2S-BL/GD/SC

    Heat-pump SUPREME series
    Dodaj do listy
    Źródło energii
    Elektryczność
    Moc grzewcza
    3.50 kW
    Moc chłodnicza
    2.70 kW
    Etykieta energetyczna UE
    A+++
    Sezonowy COP
    5.10
    Współczynnik wydajności chłodniczej (COP)
    4.66 COP
  8. MV6-400WV2GN1-E
    Producent Midea

    VRF system is used for different type of buildings - hotels, business and trade centers, industrial, education, residential and other - heating and cooling and ventilation purposes.
    Dodaj do listy
    Źródło energii
    Elektryczność
    Moc grzewcza
    40.00 kW
    Moc chłodnicza
    40.00 kW
    Etykieta energetyczna UE
    A
    Sezonowy COP
    13.78
    Współczynnik wydajności chłodniczej (COP)
    4.70 COP
  9. WPL 08 S Trend Set 2

    Inverter air | Water heat pump for compact outdoor installation for heating and cooling. Heat pump basic unit made of EPP for weight reduction and easy transport. The cladding made of metal in a separate packaging unit for easy installation on the base unit. The large finned distance of the evaporator allows low air resistance and in combination with the modulating fan in the outdoor unit, it ensures a low sound power level. The inverter compressor is regulated as required and ensures high efficiency. The 4-2-way valve enables the circulation reversal defrosting as well as the changeover from heating to cooling operation. The refrigeration circuit is filled with the safety refrigerant R410A. Including all safety devices. For operation, an external emergency / auxiliary heater as well as the heat pump manager WPM are required for control. In combination with the hydraulic module or memory modules, these functions are covered. The set includes: Heat pump of the Trend series, hydraulic module HM Trend incl. Connection set AS-HM Trend, vibration isolation for connection to the heat pump, hot water storage tank SBB 300 WP Trend for WPL 08/12 Trend or hot water storage tank SBB 400 WP Trend for WPL 16/22/28 trend.
    Dodaj do listy
    Źródło energii
    Elektryczność
    Moc grzewcza
    2.79 kW
    Moc chłodnicza
    0.00 kW
    Etykieta energetyczna UE
    A++
    Sezonowy COP
    5.00
    Współczynnik wydajności chłodniczej (COP)
    3.89 COP
Page
Ustaw kierunek malejący