Artykuły gospodarstwa domowego

AEG closed wall storage tank DEM 100 EASY hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is controlled depending (depending on the selected connection) at the set temperature. Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 100 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 186 l Operating mode Single circuit Standby energy consumption 0.97 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 1015/510/520 mm Weight empty 33 kg Weight filled 133 kg

The MSZ-LN range is a wall mounted system that blends energy efficiency with a sophisticated streamlined design. Finished with a range of deep, rich colours and a premium quality feel, this range utilises low GWP R32 refrigerant.

AEG wall storage tank DEM 80 Basic hot water storage tank, 80 liter capacity, for open and closed operation. Closed inner container, 0,6 Mpa, made of steel, special enamelled. Protection anode. Outer jacket white-painted metal jacket, thermal insulation made of rigid polyurethane foam. Universal circuit, operation in single-circuit and dual-circuit circuit possible with different Aschlußleistungen. Temperature control infinitely adjustable from approx. 35 degrees C to 85 degrees C Energy-saving position at e = 60 degrees C and E = 40 degrees C. Safety temperature limiter, signal lamp. Quality and safety signs: CE mark, VDE mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC or 3 / N / PE 400 V AC Nominal power 2-6 kW (3x2 kW) Temperature setting range 7 to 85 degrees C Mixed water quantity of 40 degrees C 135 l Operating modes Single circuit, two circuit standby energy consumption 0 , 73 kWh / 24 h Fast heating Yes Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 893/475/492 mm Weight empty 31 kg Weight filled 111 kg

CB 4315

High Capacity, Energy Savings and a Design in Harmony with Living Spaces Raise the Value of Your Room to the Next Level.

Compact, high-performance indoor and outdoor units and advanced inverter technologies provide superior energy savings and comfort in all rooms.

Suzumi Plus RAS-B22N3KV2-E1

Prestige Inverter V H12AK UL2

The SHZ LCD series of wall mounted water heaters combines a constant supply of hot water with a high level of efficiency. Three ECO programs mean that efficiency and DHW heating can be adjusted precisely to suit individual requirements. ECO COMFORT mode reduces the temperature automatically to 60 °C. ECO PLUS also reduces the charging level so that only part of the cylinder content is maintained at the required temperature. This is especially useful when only a little hot water is required at a time. The ECO DYNAMIC function enables automatic, intelligent matching to the individual draw-off behaviour. All factory settings are initially configured directly on the digital user interface and are then retained. In addition, the backlit LCD indicates the amount of hot water available, the energy consumption, the temperature currently programmed, and other information concerning the current operating status.