Heat Pumps

Arctic Inverter NG -სერიის თბური ტუმბო

ICY -სერიის თბური ტუმბო

GMLW 14 plus

SI 8TU

VRF სისტემა გამოიყენება სხვადასხვა დანიშნულების - სასტუმროების, ბიზნეს და სავაჭრო ცენტრების, ინდუსტრიული ნაგებობების, სასწავლო დაწესებულებების, სახლების და სხვა შენობების გათბობა-გაგრილებისა და ვენტილაციისათვის.

SWP14-RX33

ჰაერის რევერსული თბური ტუმბო

Air | Water heat pump with small footprint due to compact design for optional indoor or outdoor installation with cooling function. The metal housing is hot-dip galvanized and white in the color, stove enamelled. For monoenergetic heating and high hot water temperatures, the emergency / booster heater is fitted as standard. Defrosting of the evaporator by circulation reversal. The electronic expansion valve optimizes the coefficient of performance across the entire range of application. The heat pump is filled with the safety refrigerant R407 C. The heat pump is controlled via a BUS line.

Heating heat pump for indoor installation with integrated control WPM EconPlus. Sound-optimized by low-speed EC-3D radial fan, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high-performance evaporator, electronic expansion valve and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconPlus). The integrated air duct with 90 ° deflection allows a direct corner installation without air ducts or a wall installation with air ducts on the outlet side. Variable installation by air intake from the rear, flexible air outlet to the right, left or top and the possibility to move the hydraulic connections from right to left. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). Universal design for low-temperature heating systems with flexible expansion options for: Room temperature control via Smart-RTC (optional) bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.