Process Technologies

Filter
  1. Country Tunisia Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. ARBURG GmbH + Co KG 2 items
  2. Asian Plastic Machinery Co., LTD 22 items
  3. Borche 21 items
  4. Chen Hsong Group (Chen De) 22 items
  5. Coperion 1 item
  6. Ferromatik Milacron GmbH 458 items
  7. Haitian Huayuan 38 items
  8. JON WAI Machinery Works Co,. Ltd 10 items
  9. Japan Steel Works, Ltd. 1 item
  10. KraussMaffei 6 items
  11. Mas 4 items
  12. Netstal-Maschinen AG 12 items
  13. PowerJet Plastic Machinery CO. LTD. 1 item
  14. Tederic Machinery CO., LTD 14 items
  15. Wittmann Battenfeld GmbH 446 items
show more show less
Clamping power  
Specific energy consumption (Euromap)  
Specific energy consumption (per load) (Euromap)  
Heating power  
Maximum injection capacity  
Maximum output  
Rated power  
Screw diameter  
Page
Set Descending Direction
  1. MAGNA TOGGLE 400 3470 Frame screw90

    Combining the advantage of a precise and accurate toggle mechanism with advanced user-friendly controls, the Magna T Servo is a high-value injection molding machine.
    Add to List
    Rated power
    83.00 kW
    Maximum injection capacity
    450.00 cm³/s
    Screw diameter
    90.00 mm
    Clamping power
    25.10 kW
    Heating power
    57.90 kW
    Specific energy consumption (Euromap)
    0.49 kWh/kg
  2. HM 45/210 Unilog B6P screw 30 mm

    Hydraulic injection moulding machine
    Add to List
    Rated power
    40.80 kW
    Maximum injection capacity
    85.70 cm³/s
    Screw diameter
    30.00 mm
    Clamping power
    11.00 kW
    Heating power
    7.80 kW
    Specific energy consumption (Euromap)
    0.59 kWh/kg
  3. MAXIMA Performance 500 3470 Frame screw70

    Maxima Performance Series, which builds upon the highly successful Maxima platform. The Maxima Performance Series addresses the market demand for higher performance, precision and flexibility. This enhanced platform delivers faster cycle times, wider platens, a precision greaseless clamp guided on linear bearings and integrated auxiliary capability. Maxima Servo is one of Milacron’s most energy-efficient machines. The servo-hydraulic machine provides up to 70% energy savings over similar machines.
    Add to List
    Rated power
    116.80 kW
    Maximum injection capacity
    453.00 cm³/s
    Screw diameter
    70.00 mm
    Clamping power
    59.00 kW
    Heating power
    57.80 kW
    Specific energy consumption (Euromap)
    0.69 kWh/kg
  4. HM 300/1000 Unilog B6P screw 50 mm

    Hydraulic injection moulding machine
    Add to List
    Rated power
    152.50 kW
    Maximum injection capacity
    347.00 cm³/s
    Screw diameter
    50.00 mm
    Clamping power
    45.00 kW
    Heating power
    17.50 kW
    Specific energy consumption (Euromap)
    0.65 kWh/kg
  5. HM 90/210 Unilog B6P screw 30 mm

    Hydraulic injection moulding machine
    Add to List
    Rated power
    52.80 kW
    Maximum injection capacity
    103.00 cm³/s
    Screw diameter
    30.00 mm
    Clamping power
    15.00 kW
    Heating power
    7.80 kW
    Specific energy consumption (Euromap)
    0.76 kWh/kg
  6. ELEKTRON 725/4550 Frame screw 90

    Milacron’s Elektron uses 60% less energy and 90% less water than hydraulic injection molding machines, reducing operating costs substantially. Setting the standard for movement repeatability, Elektron’s stroke precision of servo-driven axes is significantly greater than top hydraulic systems
    Add to List
    Rated power
    119.00 kW
    Maximum injection capacity
    2545.00 cm³/s
    Screw diameter
    90.00 mm
    Clamping power
    65.10 kW
    Heating power
    53.90 kW
    Specific energy consumption (Euromap)
    0.38 kWh/kg
  7. EcoPower 55/130 Unilog B6 screw 25 mm

    The EcoPower: engery saving, clean, compact. The all-electric EcoPower, with clamping forces from 55 to 300 t, combines efficiency with precision. The machine also offers very good accessibility through its open design at the top on the injection side and for the disposal of the parts at the bottom.
    Add to List
    Rated power
    29.40 kW
    Maximum injection capacity
    98.20 cm³/s
    Screw diameter
    25.00 mm
    Clamping power
    6.80 kW
    Heating power
    9.00 kW
    Specific energy consumption (Euromap)
    0.55 kWh/kg
  8. K-TEC 110-265 screw 35

    Exceptional precision and repeatability, fast cycle times, high injection rates and pressure, parallel functions, and easy maintenance – these are the hallmarks of the K-TEC series of injection molding machines.
    Add to List
    Rated power
    29.00 kW
    Maximum injection capacity
    135.00 cm³/s
    Screw diameter
    35.00 mm
    Clamping power
    18.60 kW
    Heating power
    10.40 kW
    Specific energy consumption (Euromap)
    0.72 kWh/kg
  9. SmartPower 240/1330 Unilog B6 screw 50

    Injection moulding machine with servo drive or VSD
    Add to List
    Rated power
    132.90 kW
    Maximum injection capacity
    333.00 cm³/s
    Screw diameter
    50.00 mm
    Clamping power
    37.00 kW
    Heating power
    21.90 kW
    Specific energy consumption (Euromap)
    0.53 kWh/kg
Page
Set Descending Direction