Process Technologies

Filter
  1. Country Kyrgyzstan Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. ARBURG GmbH + Co KG 1 item
  2. Asian Plastic Machinery Co., LTD 22 items
  3. Borche 21 items
  4. Chen Hsong Group (Chen De) 22 items
  5. Coperion 1 item
  6. Ferromatik Milacron GmbH 464 items
  7. Haitian Huayuan 38 items
  8. JON WAI Machinery Works Co,. Ltd 10 items
  9. Japan Steel Works, Ltd. 1 item
  10. KraussMaffei 6 items
  11. Mas 4 items
  12. Netstal-Maschinen AG 12 items
  13. PowerJet Plastic Machinery CO. LTD. 1 item
  14. Tederic Machinery CO., LTD 14 items
  15. Wittmann Battenfeld GmbH 447 items
show more show less
Clamping power  
Specific energy consumption (Euromap)  
Specific energy consumption (per load) (Euromap)  
Heating power  
Maximum injection capacity  
Maximum output  
Rated power  
Screw diameter  
Page
Set Descending Direction
  1. EcoPower 90/130 Unilog B6 screw 30 mm

    The EcoPower: engery saving, clean, compact. The all-electric EcoPower, with clamping forces from 55 to 300 t, combines efficiency with precision. The machine also offers very good accessibility through its open design at the top on the injection side and for the disposal of the parts at the bottom.
    Add to List
    Rated power
    30.10 kW
    Maximum injection capacity
    141.00 cm³/s
    Screw diameter
    30.00 mm
    Clamping power
    6.10 kW
    Heating power
    10.40 kW
    Specific energy consumption (Euromap)
    0.37 kWh/kg
  2. MacroPower 550/5100 Unilog B6P Servo screw 85 mm

    Injection moulding machine with servo drive or VSD
    Add to List
    Rated power
    262.30 kW
    Maximum injection capacity
    581.00 cm³/s
    Screw diameter
    85.00 mm
    Clamping power
    75.00 kW
    Heating power
    37.30 kW
    Specific energy consumption (Euromap)
    0.26 kWh/kg
  3. HM 300/2250 Unilog B6P Servo screw 55 mm

    Injection moulding machine with servo drive or VSD
    Add to List
    Rated power
    157.70 kW
    Maximum injection capacity
    242.00 cm³/s
    Screw diameter
    55.00 mm
    Clamping power
    45.00 kW
    Heating power
    22.70 kW
    Specific energy consumption (Euromap)
    0.46 kWh/kg
  4. MAXIMA G 1100 6610 Frame screw110

    Maxima G Servo offers reliability, precision, versatility, user-friendliness and energy-savings, but at higher tonnages. Starting at 1100 and going all the way up to 6600 tons, the all-electric machine provides up to 60% energy savings over similar machines, with a reduction in molding costs, heat load on the factory floor and maintenance costs. This high-value injection molding machine combines the advantage of a precise and accurate toggle mechanism with advanced user friendly-controls.
    Add to List
    Rated power
    131.30 kW
    Maximum injection capacity
    1065.00 cm³/s
    Screw diameter
    110.00 mm
    Clamping power
    69.30 kW
    Heating power
    62.00 kW
    Specific energy consumption (Euromap)
    0.43 kWh/kg
  5. SmartPower 35/210 Unilog B6 screw 35

    Injection moulding machine with servo drive or VSD
    Add to List
    Rated power
    43.40 kW
    Maximum injection capacity
    187.00 cm³/s
    Screw diameter
    35.00 mm
    Clamping power
    11.00 kW
    Heating power
    10.40 kW
    Specific energy consumption (Euromap)
    0.43 kWh/kg
  6. EcoPower 300/750 Unilog B6 screw 35 mm

    Electric injection moulding machine
    Add to List
    Rated power
    58.30 kW
    Maximum injection capacity
    192.00 cm³/s
    Screw diameter
    35.00 mm
    Clamping power
    10.40 kW
    Heating power
    11.50 kW
    Specific energy consumption (Euromap)
    0.58 kWh/kg
  7. ELEKTRON 725/4550 Frame screw 100

    Milacron’s Elektron uses 60% less energy and 90% less water than hydraulic injection molding machines, reducing operating costs substantially. Setting the standard for movement repeatability, Elektron’s stroke precision of servo-driven axes is significantly greater than top hydraulic systems
    Add to List
    Rated power
    119.00 kW
    Maximum injection capacity
    3142.00 cm³/s
    Screw diameter
    100.00 mm
    Clamping power
    65.10 kW
    Heating power
    53.90 kW
    Specific energy consumption (Euromap)
    0.30 kWh/kg
  8. MAGNA TOGGLE 610 3470 Frame screw80

    Combining the advantage of a precise and accurate toggle mechanism with advanced user-friendly controls, the Magna T Servo is a high-value injection molding machine.
    Add to List
    Rated power
    96.60 kW
    Maximum injection capacity
    572.00 cm³/s
    Screw diameter
    80.00 mm
    Clamping power
    38.70 kW
    Heating power
    57.90 kW
    Specific energy consumption (Euromap)
    0.47 kWh/kg
  9. SmartPower 210/750 Unilog B6 screw 40

    Injection moulding machine with servo drive or VSD
    Add to List
    Rated power
    125.00 kW
    Maximum injection capacity
    229.00 cm³/s
    Screw diameter
    40.00 mm
    Clamping power
    37.00 kW
    Heating power
    14.00 kW
    Specific energy consumption (Euromap)
    0.73 kWh/kg
Page
Set Descending Direction