Heat pumps

Filter
  1. Energy source Electricity Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. Buderus 3 items
  2. CLIVET 16 items
  3. Cooper&Hunter 22 items
  4. Dimplex 18 items
  5. Hoval 2 items
  6. Junkers Bosch 3 items
  7. KNV 8 items
  8. Midea 15 items
  9. Ochsner 3 items
  10. Solarfocus 1 item
  11. Stiebel Eltron 7 items
  12. Vaillant 2 items
  13. Walter Bösch GmbH & Co KG 3 items
  14. Waterkotte 3 items
  15. Weider 1 item
  16. Wieder 1 item
show more show less
Energy source  
EU energy label  
Seasonal COP  
Cooling capacity  
Coefficient of performance (COP)  
Heating capacity  
Page
Set Descending Direction
  1. CSRN-XHE2 - 30.4

    Air cooled reversible heat pump
    Add to List
    Energy source
    Electricity
    Heating capacity
    101.00 kW
    Cooling capacity
    104.00 kW
    EU energy label
    A
    Seasonal COP
    9.77
    Coefficient of performance (COP)
    5.06 COP
  2. LRSJ-60/NYN1-A1

    Water heap pump for swimming pool.
    Add to List
    Energy source
    Electricity
    Heating capacity
    6.00 kW
    Cooling capacity
    4.00 kW
    EU energy label
    A
    Seasonal COP
    10.91
    Coefficient of performance (COP)
    5.22 COP
  3. OCHSNER EUROPA 333 Genius

    Multifunctional Appliance Air/Exhaust Air Heat Pump With 300 L Tank
    Add to List
    Energy source
    Electricity
    Heating capacity
    2.18 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A+
    Seasonal COP
    4.73
    Coefficient of performance (COP)
    3.82 COP
  4. LA 6S-TU

    Outdoor heating heat pump with wall-mounted heat pump manager WPM Econ5Plus. Sound-optimized by slow-running owl-wing fan with naturally quiet air noise, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high-performance evaporator, electronic expansion valve and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager). The small minimum wall clearance on the suction side of 50 cm allows installation close to the wall. Universal design for low-temperature heating systems with flexible expansion options for: bivalent or bivalent regenerative operation Distribution systems with unmixed and mixed heating circuits Use of variable-load tariffs (SG Ready) With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Flow and return sensor integrated; Outdoor sensor (standard NTC-2) included. Dirt catcher and flow switch integrated. The electrical connection between the control to be mounted in the building and the outdoor unit is made using a shielded 2-core data cable (for example, LiYY 2x0.6 mm² or J-Y (ST) Y..LG2x0.28mm2), which is not included in the delivery.ed and mixed heating circuits With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Add to List
    Energy source
    Electricity
    Heating capacity
    7.20 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.70 COP
  5. LA 25TU

    Outdoor heat pump with wall-mounted heat pump manager WPM EconPlus and two compressors for power reduction in partial load operation. Sound-optimized by slow-running owl-wing fan with naturally quiet air noise, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high performance evaporator and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconPlus). Access for service work on the outlet side, when installing close to the wall, the minimum distances must be observed. Easy transport by means of lift trucks (wheelchair accessible) or lifting lugs. Universal design with two compressors for modulating operation, optional hot water preparation and flexible expansion options for: bivalent or bivalent regenerative operation Distribution systems with unmixed and mixed heating circuits Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included. Electrical connecting cable EVL ..U between heat pump and heat pump manager must be ordered separately.
    Add to List
    Energy source
    Electricity
    Heating capacity
    19.60 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    3.90 COP
  6. CSRN-XHE2 - 44.4

    Air cooled reversible heat pump
    Add to List
    Energy source
    Electricity
    Heating capacity
    154.00 kW
    Cooling capacity
    148.00 kW
    EU energy label
    A
    Seasonal COP
    8.56
    Coefficient of performance (COP)
    4.68 COP
  7. CH-S12FTXLA

    Heat-pump Arctic Inverter series
    Add to List
    Energy source
    Electricity
    Heating capacity
    3.67 kW
    Cooling capacity
    3.50 kW
    EU energy label
    A+++
    Seasonal COP
    5.10
    Coefficient of performance (COP)
    4.65 COP
  8. CSRN-XHE2 - 25.4

    Air cooled reversible heat pump
    Add to List
    Energy source
    Electricity
    Heating capacity
    92.70 kW
    Cooling capacity
    95.50 kW
    EU energy label
    A
    Seasonal COP
    10.92
    Coefficient of performance (COP)
    5.39 COP
  9. LA9S-TU

    Particularly quiet due to sound-optimized housing and sound-insulated compressor compartment Maximum operational safety through sensory monitoring of the cooling circuit High efficiency due to high performance evaporator, EC fan and COP booster Newly developed defrost management uses the natural defrosting from 0 ° C to increase efficiency Integration of intelligent room temperature controllers (Smart RTC) enables further increases in system efficiency Easy and quick to install with a minimum wall clearance of 0.5m Can be optimally combined with Hydrotower (HWK 332 or as package heat pump with Hydrotower HPL S-TU)
    Add to List
    Energy source
    Electricity
    Heating capacity
    7.20 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.20 COP
Page
Set Descending Direction