Heat pumps

Filter
  1. Manufacturer Walter Bösch GmbH & Co KG Remove this item
  2. Manufacturer Dimplex Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. Buderus 3 items
  2. CLIVET 16 items
  3. Cooper&Hunter 22 items
  4. Dimplex 18 items
  5. Hoval 2 items
  6. Junkers Bosch 3 items
  7. KNV 8 items
  8. Midea 15 items
  9. NIBE Energy Systems 1 item
  10. Ochsner 17 items
  11. Solarfocus 1 item
  12. Stiebel Eltron 7 items
  13. Vaillant 2 items
  14. Walter Bösch GmbH & Co KG 3 items
  15. Waterkotte 3 items
  16. Weider 1 item
  17. Wieder 1 item
show more show less
Energy source  
EU energy label  
Seasonal COP  
Coefficient of performance (COP)  
Heating capacity  
Page
Set Descending Direction
  1. LI 12TU

    Heating heat pump for indoor installation with integrated control WPM EconPlus. Sound-optimized by low-speed EC-3D radial fan, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high-performance evaporator, electronic expansion valve and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconPlus). The integrated air duct with 90 ° deflection allows a direct corner installation without air ducts or a wall installation with air ducts on the outlet side. Variable installation by air intake from the rear, flexible air outlet to the right, left or top and the possibility to move the hydraulic connections from right to left. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). Universal design for low-temperature heating systems with flexible expansion options for: Room temperature control via Smart-RTC (optional) bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Add to List
    Energy source
    Electricity
    Heating capacity
    9.40 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.00 COP
  2. LA9S-TU

    Particularly quiet due to sound-optimized housing and sound-insulated compressor compartment Maximum operational safety through sensory monitoring of the cooling circuit High efficiency due to high performance evaporator, EC fan and COP booster Newly developed defrost management uses the natural defrosting from 0 ° C to increase efficiency Integration of intelligent room temperature controllers (Smart RTC) enables further increases in system efficiency Easy and quick to install with a minimum wall clearance of 0.5m Can be optimally combined with Hydrotower (HWK 332 or as package heat pump with Hydrotower HPL S-TU)
    Add to List
    Energy source
    Electricity
    Heating capacity
    7.20 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.20 COP
  3. SI 11TU

    SI 11TU
    Add to List
    Energy source
    Electricity
    Heating capacity
    11.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    5.00 COP
  4. LA12S-TU

    Heating package consisting of high-efficiency air / water heat pump for outdoor installation and hydro-tower with integrated heat pump manager. Heat pump Simple hydraulic connection with enclosed flexible connection set (VS 32-220) Particularly quiet due to noise optimized housing and soundproofed compressor compartment High efficiency due to high performance evaporator, EC-fan and COP booster Integration of intelligent room temperature controllers (Smart-RTC) allow further increase in system efficiency Flexible Expansion options due to 2 mixer outputs for bivalent operation and / or the control of mixed heating circuits Hydro-Tower Low installation effort due to space-optimized combination of buffer and hot water tank Easy commissioning by integrated heat pump manager and optimally matched hydraulic components Demand-dependent heating support via reversible pipe heating (2/4/6 kW)
    Add to List
    Energy source
    Electricity
    Heating capacity
    9.50 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.00 COP
  5. SIW 11TES

    SIW 11TES
    Add to List
    Energy source
    Electricity
    Heating capacity
    11.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    5.00 COP
  6. Energy source
    Electricity
    Heating capacity
    14.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    5.00 COP
  7. LA 35TUR+

    Heat pump for heating and cooling for outdoor installation with wall-mounted heat pump manager and two compressors for power reduction in partial load operation. Sound-optimized by electronically controlled fan and encapsulated compressor chamber with freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high performance evaporator and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. Optimized operation for heating and cooling by means of an external four-way change-over valve controlled by the control (special accessory). High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity metering (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconR). Access for service work on the outlet side, when installing close to the wall, the minimum distances must be observed. Easy transport by means of lift trucks (wheelchair accessible) or lifting lugs. Reversible cooling circuit with additional heat exchanger for higher hot water temperatures in heating mode and waste heat recovery in cooling mode. Universal design with flexible expansion options for: bivalent or bivalent regenerative operation combined distribution systems for heating and cooling unmixed and mixed heating / cooling circuit With an outside temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. In the case of silent cooling via surface heating / cooling systems, the room climate station (special accessory) is required to control the flow temperature as a function of the air temperature and humidity of a reference room. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included. Electrical connecting cable EVL ..U between heat pump and heat pump manager must be ordered separately.
    Add to List
    Energy source
    Electricity
    Heating capacity
    23.60 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.00 COP
  8. Energy source
    Electricity
    Heating capacity
    17.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    3.80 COP
  9. WI 35TU

    WI 35TU
    Add to List
    Energy source
    Electricity
    Heating capacity
    18.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    3.80 COP
Page
Set Descending Direction