Heat pumps

Filter
  1. Manufacturer Dimplex Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. Buderus 3 items
  2. CLIVET 16 items
  3. Cooper&Hunter 22 items
  4. Dimplex 18 items
  5. Hoval 2 items
  6. Junkers Bosch 3 items
  7. KNV 8 items
  8. Midea 15 items
  9. Ochsner 3 items
  10. Solarfocus 1 item
  11. Stiebel Eltron 7 items
  12. Vaillant 2 items
  13. Walter Bösch GmbH & Co KG 3 items
  14. Waterkotte 3 items
  15. Weider 1 item
  16. Wieder 1 item
show more show less
Energy source  
EU energy label  
Seasonal COP  
Coefficient of performance (COP)  
Heating capacity  
Page
Set Descending Direction
  1. LA 6S-TU

    Outdoor heating heat pump with wall-mounted heat pump manager WPM Econ5Plus. Sound-optimized by slow-running owl-wing fan with naturally quiet air noise, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high-performance evaporator, electronic expansion valve and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager). The small minimum wall clearance on the suction side of 50 cm allows installation close to the wall. Universal design for low-temperature heating systems with flexible expansion options for: bivalent or bivalent regenerative operation Distribution systems with unmixed and mixed heating circuits Use of variable-load tariffs (SG Ready) With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Flow and return sensor integrated; Outdoor sensor (standard NTC-2) included. Dirt catcher and flow switch integrated. The electrical connection between the control to be mounted in the building and the outdoor unit is made using a shielded 2-core data cable (for example, LiYY 2x0.6 mm² or J-Y (ST) Y..LG2x0.28mm2), which is not included in the delivery.ed and mixed heating circuits With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Add to List
    Energy source
    Electricity
    Heating capacity
    7.20 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.70 COP
  2. LIK 8TES

    Heating heat pump for indoor installation with integrated control WPM 2007 plus. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). The integrated air duct allows the corner or wall installation with air ducts on the intake and exhaust side. Sound-optimized by low-noise axial fan and vibration-decoupled compressor. High performance figures due to an evaporator optimized for heating operation and energy-efficient defrost by circulation reversal. Universal design with optional DHW heating and flexible expansion options for: bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits Built-in pipe heater (2/4/6 kW) With an outside temperature of -10 ° C, a maximum flow temperature of 53 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Add to List
    Energy source
    Electricity
    Heating capacity
    6.60 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    3.50 COP
  3. LA 25TU

    Outdoor heat pump with wall-mounted heat pump manager WPM EconPlus and two compressors for power reduction in partial load operation. Sound-optimized by slow-running owl-wing fan with naturally quiet air noise, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high performance evaporator and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconPlus). Access for service work on the outlet side, when installing close to the wall, the minimum distances must be observed. Easy transport by means of lift trucks (wheelchair accessible) or lifting lugs. Universal design with two compressors for modulating operation, optional hot water preparation and flexible expansion options for: bivalent or bivalent regenerative operation Distribution systems with unmixed and mixed heating circuits Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included. Electrical connecting cable EVL ..U between heat pump and heat pump manager must be ordered separately.
    Add to List
    Energy source
    Electricity
    Heating capacity
    19.60 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    3.90 COP
  4. WI 35TU

    WI 35TU
    Add to List
    Energy source
    Electricity
    Heating capacity
    18.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    3.80 COP
  5. SIW 11TES

    SIW 11TES
    Add to List
    Energy source
    Electricity
    Heating capacity
    11.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    5.00 COP
  6. SI 11TU

    SI 11TU
    Add to List
    Energy source
    Electricity
    Heating capacity
    11.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    5.00 COP
  7. SIK 11TES

    SIK 11TES
    Add to List
    Energy source
    Electricity
    Heating capacity
    11.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    5.00 COP
  8. LI 12TU

    Heating heat pump for indoor installation with integrated control WPM EconPlus. Sound-optimized by low-speed EC-3D radial fan, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high-performance evaporator, electronic expansion valve and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconPlus). The integrated air duct with 90 ° deflection allows a direct corner installation without air ducts or a wall installation with air ducts on the outlet side. Variable installation by air intake from the rear, flexible air outlet to the right, left or top and the possibility to move the hydraulic connections from right to left. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). Universal design for low-temperature heating systems with flexible expansion options for: Room temperature control via Smart-RTC (optional) bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Add to List
    Energy source
    Electricity
    Heating capacity
    9.40 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.00 COP
  9. LI 16TES

    Heating heat pump for indoor installation with integrated control WPM 2007 plus. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). The integrated air duct allows the corner or wall installation with air ducts on the intake and exhaust side. Sound-optimized by low-noise axial fan and vibration-decoupled compressor. High performance figures due to an evaporator optimized for heating operation and energy-efficient defrost by circulation reversal. Universal design with optional DHW heating and flexible expansion options for: bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits Built-in pipe heater (2/4/6 kW) With an outside temperature of -10 ° C, a maximum flow temperature of 53 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Add to List
    Energy source
    Electricity
    Heating capacity
    13.40 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    3.30 COP
Page
Set Descending Direction