Heat pumps

Filter
  1. Country Bulgaria Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. Buderus 3 items
  2. CLIVET 16 items
  3. Cooper&Hunter 21 items
  4. Dimplex 16 items
  5. Hoval 2 items
  6. Junkers Bosch 3 items
  7. KNV 8 items
  8. Midea 15 items
  9. Ochsner 3 items
  10. Solarfocus 1 item
  11. Stiebel Eltron 3 items
  12. Vaillant 2 items
  13. Walter Bösch GmbH & Co KG 3 items
  14. Waterkotte 3 items
  15. Weider 1 item
  16. Wieder 1 item
show more show less
Energy source  
EU energy label  
Seasonal COP  
Cooling capacity  
Coefficient of performance (COP)  
Heating capacity  
Page
Set Descending Direction
  1. LA 35TUR+

    Heat pump for heating and cooling for outdoor installation with wall-mounted heat pump manager and two compressors for power reduction in partial load operation. Sound-optimized by electronically controlled fan and encapsulated compressor chamber with freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high performance evaporator and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. Optimized operation for heating and cooling by means of an external four-way change-over valve controlled by the control (special accessory). High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity metering (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconR). Access for service work on the outlet side, when installing close to the wall, the minimum distances must be observed. Easy transport by means of lift trucks (wheelchair accessible) or lifting lugs. Reversible cooling circuit with additional heat exchanger for higher hot water temperatures in heating mode and waste heat recovery in cooling mode. Universal design with flexible expansion options for: bivalent or bivalent regenerative operation combined distribution systems for heating and cooling unmixed and mixed heating / cooling circuit With an outside temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. In the case of silent cooling via surface heating / cooling systems, the room climate station (special accessory) is required to control the flow temperature as a function of the air temperature and humidity of a reference room. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included. Electrical connecting cable EVL ..U between heat pump and heat pump manager must be ordered separately.
    Add to List
    Energy source
    Electricity
    Heating capacity
    23.60 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.00 COP
  2. CH-S12FTXTB2S-W

    Heat-pump ICY series
    Add to List
    Energy source
    Electricity
    Heating capacity
    3.65 kW
    Cooling capacity
    3.50 kW
    EU energy label
    A++
    Seasonal COP
    4.60
    Coefficient of performance (COP)
    4.06 COP
  3. 252(8)W/D2RN1T(C)

    VRF system is used for different type of buildings - hotels, business and trade centers, industrial, education, residential and other - heating and cooling and ventilation purposes.
    Add to List
    Energy source
    Electricity
    Heating capacity
    27.00 kW
    Cooling capacity
    25.20 kW
    EU energy label
    A
    Seasonal COP
    15.00
    Coefficient of performance (COP)
    4.50 COP
  4. Energy source
    Electricity
    Heating capacity
    8.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    5.00 COP
  5. MV6-560WV2GN1-E

    VRF system is used for different type of buildings - hotels, business and trade centers, industrial, education, residential and other - heating and cooling and ventilation purposes.
    Add to List
    Energy source
    Electricity
    Heating capacity
    56.00 kW
    Cooling capacity
    56.00 kW
    EU energy label
    A
    Seasonal COP
    12.65
    Coefficient of performance (COP)
    4.40 COP
  6. CSRN-XHE2 - 44.4

    Air cooled reversible heat pump
    Add to List
    Energy source
    Electricity
    Heating capacity
    154.00 kW
    Cooling capacity
    148.00 kW
    EU energy label
    A
    Seasonal COP
    8.56
    Coefficient of performance (COP)
    4.68 COP
  7. CPAN-XHE2E - 60

    Recycled air heat pump
    Add to List
    Energy source
    Electricity
    Heating capacity
    42.90 kW
    Cooling capacity
    40.80 kW
    EU energy label
    A
    Seasonal COP
    13.25
    Coefficient of performance (COP)
    5.81 COP
  8. LI 12TU

    Heating heat pump for indoor installation with integrated control WPM EconPlus. Sound-optimized by low-speed EC-3D radial fan, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high-performance evaporator, electronic expansion valve and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconPlus). The integrated air duct with 90 ° deflection allows a direct corner installation without air ducts or a wall installation with air ducts on the outlet side. Variable installation by air intake from the rear, flexible air outlet to the right, left or top and the possibility to move the hydraulic connections from right to left. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). Universal design for low-temperature heating systems with flexible expansion options for: Room temperature control via Smart-RTC (optional) bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Add to List
    Energy source
    Electricity
    Heating capacity
    9.40 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.00 COP
  9. Logatherm WLW196i-6AR

    Logatherm WLW196i-6AR
    Add to List
    Energy source
    Electricity
    Heating capacity
    5.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    4.10 COP
Page
Set Descending Direction