Heat pumps

Filter
  1. Country Turkmenistan Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. Buderus 3 items
  2. CLIVET 16 items
  3. Cooper&Hunter 22 items
  4. Dimplex 18 items
  5. Hoval 2 items
  6. Junkers Bosch 3 items
  7. KNV 8 items
  8. Midea 15 items
  9. Ochsner 3 items
  10. Solarfocus 1 item
  11. Stiebel Eltron 7 items
  12. Vaillant 2 items
  13. Walter Bösch GmbH & Co KG 3 items
  14. Waterkotte 3 items
  15. Weider 1 item
  16. Wieder 1 item
show more show less
Energy source  
EU energy label  
Seasonal COP  
Cooling capacity  
Coefficient of performance (COP)  
Heating capacity  
Page
Set Descending Direction
  1. OCHSNER EUROPA 333 Genius

    Multifunctional Appliance Air/Exhaust Air Heat Pump With 300 L Tank
    Add to List
    Energy source
    Electricity
    Heating capacity
    2.18 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A+
    Seasonal COP
    4.73
    Coefficient of performance (COP)
    3.82 COP
  2. Energy source
    Electricity
    Heating capacity
    17.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    3.80 COP
  3. CH-S12FTXAM2S-BL/GD/SC

    Heat-pump SUPREME series
    Add to List
    Energy source
    Electricity
    Heating capacity
    4.20 kW
    Cooling capacity
    3.53 kW
    EU energy label
    A+++
    Seasonal COP
    5.10
    Coefficient of performance (COP)
    4.42 COP
  4. Thermalia twin H (13)

    Thermalia twin H (13)
    Add to List
    Energy source
    Electricity
    Heating capacity
    15.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    3.80 COP
  5. LI 16TES

    Heating heat pump for indoor installation with integrated control WPM 2007 plus. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). The integrated air duct allows the corner or wall installation with air ducts on the intake and exhaust side. Sound-optimized by low-noise axial fan and vibration-decoupled compressor. High performance figures due to an evaporator optimized for heating operation and energy-efficient defrost by circulation reversal. Universal design with optional DHW heating and flexible expansion options for: bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits Built-in pipe heater (2/4/6 kW) With an outside temperature of -10 ° C, a maximum flow temperature of 53 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Add to List
    Energy source
    Electricity
    Heating capacity
    13.40 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    3.30 COP
  6. WPL 13 E

    Air | Water heat pump with steam intermediate injection for heating. Can be used as outdoor or indoor installation variant with corresponding accessories. The cladding consists of a robust metal housing made of hot-dip galvanized, powder-coated and stove-enamelled steel. The refrigeration circuit is hermetically sealed, factory tested for leaks and filled with the R407C safety refrigerant. Double vibration decoupling of the compressor to reduce the sound power level. The intercooler injectors cool the scroll compressor at low outdoor temperatures and achieve higher heat output. The large finned spacing of the evaporator allows for lower air resistance for sound reduction and better defrosting. The 4-2 way valve allows the circulation reversal. Biflow-capable electronic expansion valve with its own control and control via the internal heat pump control (IWS) to optimize the overheating control and thus to improve the COP. Time-optimized and energy-efficient circulation reversal protection. Heating the condensate pan through the refrigeration circuit for efficient defrosting. With integrated heat quantity and electricity metering via cooling circuit data. Including all safety devices. Heat pump manager WPM 3 (accessory) necessary for control.
    Add to List
    Energy source
    Electricity
    Heating capacity
    8.20 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    3.40 COP
  7. 280(10)W/D2RN1T(C)

    VRF system is used for different type of buildings - hotels, business and trade centers, industrial, education, residential and other - heating and cooling and ventilation purposes.
    Add to List
    Energy source
    Electricity
    Heating capacity
    31.50 kW
    Cooling capacity
    28.00 kW
    EU energy label
    A
    Seasonal COP
    14.32
    Coefficient of performance (COP)
    4.30 COP
  8. LRSJ-60/NYN1-A1

    Water heap pump for swimming pool.
    Add to List
    Energy source
    Electricity
    Heating capacity
    6.00 kW
    Cooling capacity
    4.00 kW
    EU energy label
    A
    Seasonal COP
    10.91
    Coefficient of performance (COP)
    5.22 COP
  9. EcoTouc Compakt

    EcoTouc Compakt
    Add to List
    Energy source
    Electricity
    Heating capacity
    13.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A+++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    3.80 COP
Page
Set Descending Direction