Heat pumps

Filter
  1. Country Morocco Remove this item
Clear all
Category  
Technology  
Category  
Country  
Manufacturer  
  1. Buderus 3 items
  2. CLIVET 16 items
  3. Cooper&Hunter 22 items
  4. Dimplex 17 items
  5. Hoval 2 items
  6. Junkers Bosch 3 items
  7. KNV 8 items
  8. Midea 15 items
  9. NIBE Energy Systems 1 item
  10. Ochsner 17 items
  11. Solarfocus 1 item
  12. Stiebel Eltron 6 items
  13. Vaillant 2 items
  14. Walter Bösch GmbH & Co KG 3 items
  15. Waterkotte 3 items
  16. Weider 1 item
show more show less
Coefficient of performance (COP)  
Energy source  
Heating capacity  
Cooling capacity  
EU energy label  
Seasonal COP  
Page
Set Descending Direction
  1. LI 12TU

    Heating heat pump for indoor installation with integrated control WPM EconPlus. Sound-optimized by low-speed EC-3D radial fan, enclosed compressor chamber and freely oscillating compressor base plate for structure-borne sound decoupling. High performance figures due to high-performance evaporator, electronic expansion valve and fulfillment of the requirements according to EN 14511 for larger volume flows on the heat utilization side. High operational safety through sensory monitoring of the refrigeration circuit with demand-dependent defrosting; Integrated heat quantity counting (display of the calculated heat quantity for heating and hot water preparation at the heat pump manager WPM EconPlus). The integrated air duct with 90 ° deflection allows a direct corner installation without air ducts or a wall installation with air ducts on the outlet side. Variable installation by air intake from the rear, flexible air outlet to the right, left or top and the possibility to move the hydraulic connections from right to left. The control unit integrated in a brown-red design panel can also be used as a wired remote control by means of a wall mounting set (special accessory MS PGD). Universal design for low-temperature heating systems with flexible expansion options for: Room temperature control via Smart-RTC (optional) bivalent or bivalent regenerative mode Distribution systems with unmixed and mixed heating circuits With an outdoor temperature of -10 ° C, a maximum flow temperature of 56 ° C can be achieved. Soft starter, flow and return sensor integrated; Outdoor sensor (standard NTC-2) included.
    Add to List
    Energy source
    Electricity
    Heating capacity
    9.40 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.00 COP
  2. EcoTouc Compakt

    EcoTouc Compakt
    Add to List
    Energy source
    Electricity
    Heating capacity
    13.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A+++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    3.80 COP
  3. CH-S09FTXAM2S-BL/GD/SC

    Heat-pump SUPREME series
    Add to List
    Energy source
    Electricity
    Heating capacity
    3.50 kW
    Cooling capacity
    2.70 kW
    EU energy label
    A+++
    Seasonal COP
    5.10
    Coefficient of performance (COP)
    4.66 COP
  4. LA9S-TU

    Particularly quiet due to sound-optimized housing and sound-insulated compressor compartment Maximum operational safety through sensory monitoring of the cooling circuit High efficiency due to high performance evaporator, EC fan and COP booster Newly developed defrost management uses the natural defrosting from 0 ° C to increase efficiency Integration of intelligent room temperature controllers (Smart RTC) enables further increases in system efficiency Easy and quick to install with a minimum wall clearance of 0.5m Can be optimally combined with Hydrotower (HWK 332 or as package heat pump with Hydrotower HPL S-TU)
    Add to List
    Energy source
    Electricity
    Heating capacity
    7.20 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    4.20 COP
  5. CSRN-XHE2 - 30.4

    Air cooled reversible heat pump
    Add to List
    Energy source
    Electricity
    Heating capacity
    101.00 kW
    Cooling capacity
    104.00 kW
    EU energy label
    A
    Seasonal COP
    9.77
    Coefficient of performance (COP)
    5.06 COP
  6. CH-S12FTXS-W

    Heat-pump Arctic Design series
    Add to List
    Energy source
    Electricity
    Heating capacity
    3.97 kW
    Cooling capacity
    3.53 kW
    EU energy label
    A++
    Seasonal COP
    4.90
    Coefficient of performance (COP)
    4.71 COP
  7. AIR 23 C12A

    High Efficiency AIR/WATER Heat pump including Horizontal split Evaporator. Heating/Cooling/Hot Water up to 65°C.
    Add to List
    Energy source
    Electricity
    Heating capacity
    20.70 kW
    Cooling capacity
    15.20 kW
    EU energy label
    A++
    Seasonal COP
    4.60
    Coefficient of performance (COP)
    4.60 COP
  8. WPL 13 cool

    Air | Water heat pump with small footprint due to compact design for optional indoor or outdoor installation with cooling function. The metal housing is hot-dip galvanized and white in the color, stove enamelled. For monoenergetic heating and high hot water temperatures, the emergency / booster heater is fitted as standard. Defrosting of the evaporator by circulation reversal. The electronic expansion valve optimizes the coefficient of performance across the entire range of application. The heat pump is filled with the safety refrigerant R407 C. The heat pump is controlled via a BUS line.
    Add to List
    Energy source
    Electricity
    Heating capacity
    8.10 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A+
    Seasonal COP
    5.00
    Coefficient of performance (COP)
    3.40 COP
  9. CS7000i LW M

    CS7000i LW M
    Add to List
    Energy source
    Electricity
    Heating capacity
    10.00 kW
    Cooling capacity
    0.00 kW
    EU energy label
    A++
    Seasonal COP
    3.00
    Coefficient of performance (COP)
    5.00 COP
Page
Set Descending Direction