Domestic Appliances

Filter
  1. Technology Hot water cylinder Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. AEG 6 items
  2. Austria Email 4 items
  3. Siemens 2 items
  4. Stiebel Eltron 6 items
  5. Vaillant 2 items
show more show less
EU labelling  
Storage capacity  
Energy demand (EN60379)  
Losses in per 10 l in 24 hours  
Page
Set Descending Direction
  1. SH 80 S

    AEG wall storage tank DEM 80 Basic hot water storage tank, 80 liter capacity, for open and closed operation. Closed inner container, 0,6 Mpa, made of steel, special enamelled. Protection anode. Outer jacket white-painted metal jacket, thermal insulation made of rigid polyurethane foam. Universal circuit, operation in single-circuit and dual-circuit circuit possible with different Aschlußleistungen. Temperature control infinitely adjustable from approx. 35 degrees C to 85 degrees C Energy-saving position at e = 60 degrees C and E = 40 degrees C. Safety temperature limiter, signal lamp. Quality and safety signs: CE mark, VDE mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC or 3 / N / PE 400 V AC Nominal power 2-6 kW (3x2 kW) Temperature setting range 7 to 85 degrees C Mixed water quantity of 40 degrees C 135 l Operating modes Single circuit, two circuit standby energy consumption 0 , 73 kWh / 24 h Fast heating Yes Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 893/475/492 mm Weight empty 31 kg Weight filled 111 kg
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.66 kWh/d
    Energy demand (EN60379)
    6.42 kWh/d
    EU labelling
    C
  2. EWH 086 E

    The EWH compact accumulators in pressure-resistant design "stand" for optimum value for money and energy-saving DHW heating. , Internal boiler enamelled according to DIN 4753, operating pressure 6 bar, including protective anode Energy-saving PU insulation (direct foaming) Stepless temperature control up to 85 ° C Energy saving at 65 ° C Anti-freeze position Integrated pointer thermometer
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.71 kWh/d
    Energy demand (EN60379)
    6.60 kWh/d
    EU labelling
    C
  3. DEM 100 Comfort EL variowall

    AEG closed wall storage tank DEM 100 EASY hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is controlled depending (depending on the selected connection) at the set temperature. Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 100 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 186 l Operating mode Single circuit Standby energy consumption 0.97 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 1015/510/520 mm Weight empty 33 kg Weight filled 133 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.83 kWh/d
    Energy demand (EN60379)
    12.51 kWh/d
    EU labelling
    C
  4. EWH 108 E

    Hot water wall storage tank for any desired hot water supply. -closed (flameproof) to supply multiple outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Open (unpressurized) to supply a sampling point. -Boiler operation also possible.Stahl inner container with special enamelling and anti-corrosion rod, thermal insulation with low heat loss. Heating flange dual circuit / single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). In boiler operation, the water content is heated once and the heating must be turned on by hand. Stepless temperature setting from approx. 35 degrees C to approx. 82 degrees C possible. For single-circuit operation, automatic frost protection. Signal lamp for boiler operation and rapid heating (once by pushbutton, remote control provided by customer), exchangeable copper heating flange with drainage nozzle. Installation with: Safety group KV 30 or KV 40 with pressure-resistant connection or fitting for open units with pressure-free connection. Quality and safety signs: VDE / GS mark, radio protection sign, IP 24 D (splash-proof)
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.78 kWh/d
    Energy demand (EN60379)
    12.40 kWh/d
    EU labelling
    B
  5. DEM 100 Basis variowall

    AEG closed wall storage tank DEM 80 EASY Hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 142 l Operating mode Single circuit Standby energy consumption 0.79 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 860/510/520 mm Weight empty 28 kg Weight filled 108 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.83 kWh/d
    Energy demand (EN60379)
    12.31 kWh/d
    EU labelling
    C
  6. DEM 80 Basis variowall

    AEG wall storage tank DEM 80 Basic hot water storage tank, 80 liter capacity, for open and closed operation. Closed inner container, 0,6 Mpa, made of steel, special enamelled. Protection anode. Outer jacket white-painted metal jacket, thermal insulation made of rigid polyurethane foam. Universal circuit, operation in single-circuit and dual-circuit circuit possible with different Aschlußleistungen. Temperature control infinitely adjustable from approx. 35 degrees C to 85 degrees C Energy-saving position at e = 60 degrees C and E = 40 degrees C. Safety temperature limiter, signal lamp. Quality and safety signs: CE mark, VDE mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC or 3 / N / PE 400 V AC Nominal power 2-6 kW (3x2 kW) Temperature setting range 7 to 85 degrees C Mixed water quantity of 40 degrees C 135 l Operating modes Single circuit, two circuit standby energy consumption 0 , 73 kWh / 24 h Fast heating Yes Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 893/475/492 mm Weight empty 31 kg Weight filled 111 kg
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.73 kWh/d
    Energy demand (EN60379)
    6.22 kWh/d
    EU labelling
    C
  7. HFA-Z 100

    Hot water wall storage tank for any desired hot water supply. -closed (flameproof) to supply multiple outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Open (unpressurized) to supply a sampling point. -Boiler operation also possible.Stahl inner container with special enamelling and anti-corrosion rod, thermal insulation with low heat loss. Heating flange dual circuit / single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). In boiler operation, the water content is heated once and the heating must be turned on by hand. Stepless temperature setting from approx. 35 degrees C to approx. 82 degrees C possible. For single-circuit operation, automatic frost protection. Signal lamp for boiler operation and rapid heating (once by pushbutton, remote control provided by customer), exchangeable copper heating flange with drainage nozzle. Installation with: Safety group KV 30 or KV 40 with pressure-resistant connection or fitting for open units with pressure-free connection. Quality and safety signs: VDE / GS mark, radio protection sign, IP 24 D (splash-proof)
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.90 kWh/d
    Energy demand (EN60379)
    12.58 kWh/d
    EU labelling
    C
  8. HFA-Z 80

    Hot water wall storage tank for any desired hot water supply. -closed (flameproof) to supply multiple outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Open (unpressurized) to supply a sampling point. -Boiler operation also possible.Stahl inner container with special enamelling and anti-corrosion rod, thermal insulation with low heat loss. Heating flange dual circuit / single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). In boiler operation, the water content is heated once and the heating must be turned on by hand. Stepless temperature setting from approx. 35 degrees C to approx. 82 degrees C possible. For single-circuit operation, automatic frost protection. Signal lamp for boiler operation and rapid heating (once by pushbutton, remote control provided by customer), exchangeable copper heating flange with drainage nozzle. Installation with: Safety group KV 30 or KV 40 with pressure-resistant connection or fitting for open units with pressure-free connection. Quality and safety signs: VDE / GS mark, radio protection sign, IP 24 D (splash-proof)
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.79 kWh/d
    Energy demand (EN60379)
    6.60 kWh/d
    EU labelling
    C
  9. SH 100 S

    AEG wall storage tank DEM 100 Comfort EL Angular, wall-mounted Comfort hot water tank with special enamelled (CoPro) steel inner tank, directly foamed. For closed operation. Electronics operated. Smart control electronics include 3 ECO energy saving programs. The display shows the setpoint temperature. Other functions: frost protection, temperature limit and rapid heating (boiler). Radiator made of high quality stainless steel. Heating flange with external current anode. The temperature setting is infinitely variable via the electronics. Temperature setting range between 7 and 85 degrees C. Content 100 l Electrical connection 1 / N / PE 230 V AC or 3 / N / PE 400 V AC Rated power 2-6 kW (3x2 kW) Temperature setting range 7 to 85 degrees C Mixed water quantity of 40 degrees C 178 l Operating modes Single circuit, dual circuit, boiler operation Stand-by energy consumption 0.83 kWh / 24 h Smart function Yes Reverse control Yes Rapid heating Yes Anode Foreign current anode Protection IP 25 Height / Width / Depth 1045/492/475 mm Weight empty 35 kg Weight filled 135 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.77 kWh/d
    Energy demand (EN60379)
    12.29 kWh/d
    EU labelling
    C
Page
Set Descending Direction