Domestic Appliances

Filter
  1. EU labelling C Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. AEG 5 items
  2. Austria Email 2 items
  3. Siemens 2 items
  4. Stiebel Eltron 5 items
  5. Vaillant 2 items
show more show less
EU labelling  
Storage capacity  
Energy demand (EN60379)  
Losses in per 10 l in 24 hours  
Page
Set Descending Direction
  1. EWH 086 E

    The EWH compact accumulators in pressure-resistant design "stand" for optimum value for money and energy-saving DHW heating. , Internal boiler enamelled according to DIN 4753, operating pressure 6 bar, including protective anode Energy-saving PU insulation (direct foaming) Stepless temperature control up to 85 ° C Energy saving at 65 ° C Anti-freeze position Integrated pointer thermometer
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.71 kWh/d
    Energy demand (EN60379)
    6.60 kWh/d
    EU labelling
    C
  2. EKH-S 080

    The well-proven EKH electric water heater has been re-engineered and is now called the EKH-S and offers an significantly enhanced protection against corrosion so that you can now enjoy a 10-year warranty with this product
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.71 kWh/d
    Energy demand (EN60379)
    6.60 kWh/d
    EU labelling
    C
  3. SHZ 100 LCD

    The SHZ LCD series of wall mounted water heaters combines a constant supply of hot water with a high level of efficiency. Three ECO programs mean that efficiency and DHW heating can be adjusted precisely to suit individual requirements. ECO COMFORT mode reduces the temperature automatically to 60 °C. ECO PLUS also reduces the charging level so that only part of the cylinder content is maintained at the required temperature. This is especially useful when only a little hot water is required at a time. The ECO DYNAMIC function enables automatic, intelligent matching to the individual draw-off behaviour. All factory settings are initially configured directly on the digital user interface and are then retained. In addition, the backlit LCD indicates the amount of hot water available, the energy consumption, the temperature currently programmed, and other information concerning the current operating status.
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.86 kWh/d
    Energy demand (EN60379)
    12.69 kWh/d
    EU labelling
    C
  4. DEM 100 Basis variowall

    AEG closed wall storage tank DEM 80 EASY Hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 142 l Operating mode Single circuit Standby energy consumption 0.79 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 860/510/520 mm Weight empty 28 kg Weight filled 108 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.83 kWh/d
    Energy demand (EN60379)
    12.31 kWh/d
    EU labelling
    C
  5. DEM 100 Comfort EL variowall

    AEG closed wall storage tank DEM 100 EASY hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is controlled depending (depending on the selected connection) at the set temperature. Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 100 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 186 l Operating mode Single circuit Standby energy consumption 0.97 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 1015/510/520 mm Weight empty 33 kg Weight filled 133 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.83 kWh/d
    Energy demand (EN60379)
    12.51 kWh/d
    EU labelling
    C
  6. DEM 80 Easy

    AEG closed wall storage tank DEM 80 EASY Hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 142 l Operating mode Single circuit Standby energy consumption 0.79 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 860/510/520 mm Weight empty 28 kg Weight filled 108 kg
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.79 kWh/d
    Energy demand (EN60379)
    6.60 kWh/d
    EU labelling
    C
  7. HFA-Z 80

    Hot water wall storage tank for any desired hot water supply. -closed (flameproof) to supply multiple outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Open (unpressurized) to supply a sampling point. -Boiler operation also possible.Stahl inner container with special enamelling and anti-corrosion rod, thermal insulation with low heat loss. Heating flange dual circuit / single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). In boiler operation, the water content is heated once and the heating must be turned on by hand. Stepless temperature setting from approx. 35 degrees C to approx. 82 degrees C possible. For single-circuit operation, automatic frost protection. Signal lamp for boiler operation and rapid heating (once by pushbutton, remote control provided by customer), exchangeable copper heating flange with drainage nozzle. Installation with: Safety group KV 30 or KV 40 with pressure-resistant connection or fitting for open units with pressure-free connection. Quality and safety signs: VDE / GS mark, radio protection sign, IP 24 D (splash-proof)
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.79 kWh/d
    Energy demand (EN60379)
    6.60 kWh/d
    EU labelling
    C
  8. DEM 100 EASY

    AEG closed wall storage tank DEM 100 EASY hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is controlled depending (depending on the selected connection) at the set temperature. Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 100 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 186 l Operating mode Single circuit Standby energy consumption 0.97 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 1015/510/520 mm Weight empty 33 kg Weight filled 133 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.98 kWh/d
    Energy demand (EN60379)
    12.58 kWh/d
    EU labelling
    C
  9. SH 100 S

    AEG wall storage tank DEM 100 Comfort EL Angular, wall-mounted Comfort hot water tank with special enamelled (CoPro) steel inner tank, directly foamed. For closed operation. Electronics operated. Smart control electronics include 3 ECO energy saving programs. The display shows the setpoint temperature. Other functions: frost protection, temperature limit and rapid heating (boiler). Radiator made of high quality stainless steel. Heating flange with external current anode. The temperature setting is infinitely variable via the electronics. Temperature setting range between 7 and 85 degrees C. Content 100 l Electrical connection 1 / N / PE 230 V AC or 3 / N / PE 400 V AC Rated power 2-6 kW (3x2 kW) Temperature setting range 7 to 85 degrees C Mixed water quantity of 40 degrees C 178 l Operating modes Single circuit, dual circuit, boiler operation Stand-by energy consumption 0.83 kWh / 24 h Smart function Yes Reverse control Yes Rapid heating Yes Anode Foreign current anode Protection IP 25 Height / Width / Depth 1045/492/475 mm Weight empty 35 kg Weight filled 135 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.77 kWh/d
    Energy demand (EN60379)
    12.29 kWh/d
    EU labelling
    C
Page
Set Descending Direction