Domestic Appliances

Filter
  1. Manufacturer AEG Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. AEG 6 items
  2. Ariston 26 items
  3. Austria Email 4 items
  4. Bandini 2 items
  5. Bauknecht 4 items
  6. Beko 1 item
  7. Buderus 10 items
  8. Comfee 2 items
  9. Daikin 3 items
  10. Eldom 9 items
  11. Ferroli 1 item
  12. Fujitso 1 item
  13. LG 4 items
  14. Liebherr 7 items
  15. Miele 1 item
  16. Mitsubishi 5 items
  17. Mitsubishi Electric 29 items
show more show less
EU labelling  
Storage capacity  
Energy demand (EN60379)  
Losses in per 10 l in 24 hours  
Set Descending Direction
  1. DEM 100 Comfort EL variowall

    AEG closed wall storage tank DEM 100 EASY hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is controlled depending (depending on the selected connection) at the set temperature. Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 100 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 186 l Operating mode Single circuit Standby energy consumption 0.97 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 1015/510/520 mm Weight empty 33 kg Weight filled 133 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.83 kWh/d
    Energy demand (EN60379)
    12.51 kWh/d
    EU labelling
    C
  2. DEM 100 Basis variowall

    AEG closed wall storage tank DEM 80 EASY Hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 142 l Operating mode Single circuit Standby energy consumption 0.79 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 860/510/520 mm Weight empty 28 kg Weight filled 108 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.83 kWh/d
    Energy demand (EN60379)
    12.31 kWh/d
    EU labelling
    C
  3. DEM 80 Basis variowall

    AEG wall storage tank DEM 80 Basic hot water storage tank, 80 liter capacity, for open and closed operation. Closed inner container, 0,6 Mpa, made of steel, special enamelled. Protection anode. Outer jacket white-painted metal jacket, thermal insulation made of rigid polyurethane foam. Universal circuit, operation in single-circuit and dual-circuit circuit possible with different Aschlußleistungen. Temperature control infinitely adjustable from approx. 35 degrees C to 85 degrees C Energy-saving position at e = 60 degrees C and E = 40 degrees C. Safety temperature limiter, signal lamp. Quality and safety signs: CE mark, VDE mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC or 3 / N / PE 400 V AC Nominal power 2-6 kW (3x2 kW) Temperature setting range 7 to 85 degrees C Mixed water quantity of 40 degrees C 135 l Operating modes Single circuit, two circuit standby energy consumption 0 , 73 kWh / 24 h Fast heating Yes Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 893/475/492 mm Weight empty 31 kg Weight filled 111 kg
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.73 kWh/d
    Energy demand (EN60379)
    6.22 kWh/d
    EU labelling
    C
  4. DEM 100 EASY

    AEG closed wall storage tank DEM 100 EASY hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is controlled depending (depending on the selected connection) at the set temperature. Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 100 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 186 l Operating mode Single circuit Standby energy consumption 0.97 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 1015/510/520 mm Weight empty 33 kg Weight filled 133 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.98 kWh/d
    Energy demand (EN60379)
    12.58 kWh/d
    EU labelling
    C
  5. DEM 80 Easy

    AEG closed wall storage tank DEM 80 EASY Hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 142 l Operating mode Single circuit Standby energy consumption 0.79 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 860/510/520 mm Weight empty 28 kg Weight filled 108 kg
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.79 kWh/d
    Energy demand (EN60379)
    6.60 kWh/d
    EU labelling
    C
  6. DEM 80 Comfort EL variowall

    The EWH compact accumulators in pressure-resistant design "stand" for optimum value for money and energy-saving DHW heating. , Internal boiler enamelled according to DIN 4753, operating pressure 6 bar, including protective anode Energy-saving PU insulation (direct foaming) Stepless temperature control up to 85 ° C Energy saving at 65 ° C Anti-freeze position Integrated pointer thermometer...
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.73 kWh/d
    Energy demand (EN60379)
    6.37 kWh/d
    EU labelling
    B
Set Descending Direction