By using this site, you confirm that you accept our Terms and Conditions as well as our Cookies Policy. Read more.
Storage capacity80.00 lLosses in per 10 l in 24 hours0.71 kWh/dEnergy demand (EN60379)6.60 kWh/dEU labellingC
AEG wall storage tank DEM 100 Basic hot water tank, 100 liter capacity, for open and closed operation. Closed inner container, 0,6 Mpa, made of steel, special enamelled. Protection anode. Outer jacket white-painted metal jacket, thermal insulation made of rigid polyurethane foam. Universal circuit, operation in single-circuit and dual-circuit circuit with different connection capacities possible. Temperature control infinitely adjustable from approx. 35 degrees C to 85 degrees C Energy-saving position at e = 60 degrees C and E = 40 degrees C. Safety temperature limiter, signal lamp. Quality and safety signs: CE mark, VDE mark. Capacity 100 l Electrical connection 1 / N / PE 230 V AC or 3 / N / PE 400 V AC Nominal power 2-6 kW (3x2 kW) Temperature setting range 7 to 85 degrees C Mixed water quantity of 40 degrees C 178 l Operating modes Single circuit, dual circuit standby energy consumption 0 , 83 kWh / 24 h Fast heating Yes Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 1045/475/492 mm Weight empty 35 kg Weight filled 135 kgStorage capacity100.00 lLosses in per 10 l in 24 hours0.78 kWh/dEnergy demand (EN60379)12.40 kWh/dEU labellingB
Hot water wall storage tank for any desired hot water supply. -closed (flameproof) to supply multiple outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Open (unpressurized) to supply a sampling point. -Boiler operation also possible.Stahl inner container with special enamelling and anti-corrosion rod, thermal insulation with low heat loss. Heating flange dual circuit / single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). In boiler operation, the water content is heated once and the heating must be turned on by hand. Stepless temperature setting from approx. 35 degrees C to approx. 82 degrees C possible. For single-circuit operation, automatic frost protection. Signal lamp for boiler operation and rapid heating (once by pushbutton, remote control provided by customer), exchangeable copper heating flange with drainage nozzle. Installation with: Safety group KV 30 or KV 40 with pressure-resistant connection or fitting for open units with pressure-free connection. Quality and safety signs: VDE / GS mark, radio protection sign, IP 24 D (splash-proof)Storage capacity100.00 lLosses in per 10 l in 24 hours0.78 kWh/dEnergy demand (EN60379)12.40 kWh/dEU labellingB
The EWH compact accumulators in pressure-resistant design "stand" for optimum value for money and energy-saving DHW heating. , Internal boiler enamelled according to DIN 4753, operating pressure 6 bar, including protective anode Energy-saving PU insulation (direct foaming) Stepless temperature control up to 85 ° C Energy saving at 65 ° C Anti-freeze position Integrated pointer thermometerStorage capacity80.00 lLosses in per 10 l in 24 hours0.71 kWh/dEnergy demand (EN60379)6.60 kWh/dEU labellingC