By using this site, you confirm that you accept our Terms and Conditions as well as our Cookies Policy. Read more.
The EWH compact accumulators in pressure-resistant design "stand" for optimum value for money and energy-saving DHW heating. , Internal boiler enamelled according to DIN 4753, operating pressure 6 bar, including protective anode Energy-saving PU insulation (direct foaming) Stepless temperature control up to 85 ° C Energy saving at 65 ° C Anti-freeze position Integrated pointer thermometer...Storage capacity100.00 lLosses in per 10 l in 24 hours0.79 kWh/dEnergy demand (EN60379)12.37 kWh/dEU labellingC
Hot water wall storage tank for any desired hot water supply. -closed (flameproof) to supply multiple outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Open (unpressurized) to supply a sampling point. -Boiler operation also possible.Stahl inner container with special enamelling and anti-corrosion rod, thermal insulation with low heat loss. Heating flange dual circuit / single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). In boiler operation, the water content is heated once and the heating must be turned on by hand. Stepless temperature setting from approx. 35 degrees C to approx. 82 degrees C possible. For single-circuit operation, automatic frost protection. Signal lamp for boiler operation and rapid heating (once by pushbutton, remote control provided by customer), exchangeable copper heating flange with drainage nozzle. Installation with: Safety group KV 30 or KV 40 with pressure-resistant connection or fitting for open units with pressure-free connection. Quality and safety signs: VDE / GS mark, radio protection sign, IP 24 D (splash-proof)Storage capacity80.00 lLosses in per 10 l in 24 hours0.66 kWh/dEnergy demand (EN60379)6.36 kWh/dEU labellingC