Domestic Appliances

Filter
  1. Country Slovakia Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. AEG 6 items
  2. Ariston 26 items
  3. Austria Email 4 items
  4. Bandini 2 items
  5. Bauknecht 4 items
  6. Beko 1 item
  7. Buderus 10 items
  8. Comfee 1 item
  9. Daikin 2 items
  10. Eldom 9 items
  11. Ferroli 1 item
  12. LG 4 items
  13. Liebherr 7 items
  14. Miele 1 item
  15. Mitsubishi 2 items
  16. Mitsubishi Electric 8 items
show more show less
EU energy label  
EU labelling  
Mode  
Storage capacity  
Annual energy consumption  
Capacity  
Cooling capacity  
Cooling capacity  
Energy Efficiency Ratio (EER)  
Energy demand (EN60379)  
Losses in per 10 l in 24 hours  
Page
Set Descending Direction
  1. MSZ-FH25VE(2)

    The F Series is designed for optimum cooling/heating performance as well as operational comfort. Quiet, energy-saving operation is supported by some of Mitsubishi Electric’s latest technologies. Advanced functions such as “3D i-see Sensor” temperature control and the Plasma Quad air purifcation system raise room comfort levels to new heights.
    Add to List
    Cooling capacity
    2.50 kW
    Energy Efficiency Ratio (EER)
    5.15 EER
    Annual energy consumption
    96.00 kWh/a
    EU energy label
    A+++
  2. TESY EV 12S 300 65

    Floor standing storage tanks with a heat exchanger
    Add to List
    Storage capacity
    300.00 l
    Losses in per 10 l in 24 hours
    1.70 kWh/d
    Energy demand (EN60379)
    2.00 kWh/d
    EU labelling
    B
  3. ELDOM 150 Mixed cylinder: one heat exchanger + electric heating element

    ELDOM water heaters are produced in a wide range with capacities ranging from 80 liters to 500 liters.    They are designed to produce domestic hot water (DHW).    water heaters have the following features:      • are made of quality steel inside;      • the heating source is mixed: electric (resistance with nominal power of 1.5 - 2 - 3 kW) and heat exchanger (connected to a hot water boiler) thermal insulation of injected polyurethane;
    Add to List
    Storage capacity
    150.00 l
    Losses in per 10 l in 24 hours
    1.00 kWh/d
    Energy demand (EN60379)
    1.50 kWh/d
    EU labelling
    B
  4. Buderus Logalux SU200/5 -200 L monovalent water heater

    Buderus Logalux SU200/5 -200 L monovalent water heater
    Add to List
    Storage capacity
    200.00 l
    Losses in per 10 l in 24 hours
    2.00 kWh/d
    Energy demand (EN60379)
    2.40 kWh/d
    EU labelling
    B
  5. Buderus Logalux 200 W - 200 L monovalent water heater

    Vertical cylinder Buderus Logalux SNB 200 W - white, with indirect heating, equipped with an internal coil. The hot water cylinder is only used in combination with a boiler. The water heater is equipped with magnesium anode for additional anti-corrosion protection and is thermally insulated; the thermal insulation is protected externally by an aluminum sheet - made in Germany
    Add to List
    Storage capacity
    200.00 l
    Losses in per 10 l in 24 hours
    2.00 kWh/d
    Energy demand (EN60379)
    2.00 kWh/d
    EU labelling
    B
  6. KG39EBI41

    KG39NXB45
    Add to List
    Energy Efficiency Ratio (EER)
    18.81 EER
    Annual energy consumption
    156.00 kWh/a
    Capacity
    337.00 l
    Cooling capacity
    0.18 kW
    Mode
    Cooling & freezing
    EU energy label
    A+++
  7. ELDOM Solar heater 150 L with 2 heat exchangers and electric heating element

    ELDOM water heaters are produced in a wide range with capacities ranging from 80 liters to 500 liters.    They are designed to produce domestic hot water (DHW).    water heaters have the following features:      • are made of quality steel inside;      • the heating source is mixed: electric (resistance with nominal power of 1.5 - 2 - 3 kW) and heat exchanger (connected to a hot water boiler) thermal insulation of injected polyurethane;
    Add to List
    Storage capacity
    150.00 l
    Losses in per 10 l in 24 hours
    1.00 kWh/d
    Energy demand (EN60379)
    1.50 kWh/d
    EU labelling
    B
  8. DEM 100 Basis variowall

    AEG closed wall storage tank DEM 80 EASY Hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is kept at the set temperature depending on the controller (depending on the selected connection). Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 80 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 142 l Operating mode Single circuit Standby energy consumption 0.79 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 860/510/520 mm Weight empty 28 kg Weight filled 108 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.83 kWh/d
    Energy demand (EN60379)
    12.31 kWh/d
    EU labelling
    C
  9. ELDOM 120 water heater

    ELDOM 120 Mixed cylinder: one heat exchanger + electric resistance ELDOM water heaters are produced in a wide range with capacities ranging from 80 liters to 500 liters.    They are designed to produce domestic hot water (DHW).    water heaters have the following features:      • are made of quality steel inside;      • the heating source is mixed: electric (resistance with nominal power of 1.5 - 2 - 3 kW) and heat exchanger (connected to a hot water boiler) thermal insulation of injected polyurethane;
    Add to List
    Storage capacity
    120.00 l
    Losses in per 10 l in 24 hours
    1.00 kWh/d
    Energy demand (EN60379)
    1.50 kWh/d
    EU labelling
    B
Page
Set Descending Direction