Domestic Appliances

Filter
  1. Country Kazakhstan Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. AEG 6 items
  2. Ariston 26 items
  3. Austria Email 4 items
  4. Bandini 2 items
  5. Bauknecht 4 items
  6. Beko 1 item
  7. Buderus 10 items
  8. Comfee 2 items
  9. Daikin 3 items
  10. Eldom 9 items
  11. Ferroli 1 item
  12. Fujitso 1 item
  13. LG 4 items
  14. Liebherr 7 items
  15. Miele 1 item
  16. Mitsubishi 5 items
show more show less
EU energy label  
EU labelling  
Mode  
Storage capacity  
Annual energy consumption  
Capacity  
Cooling capacity  
Cooling capacity  
Energy Efficiency Ratio (EER)  
Energy demand (EN60379)  
Losses in per 10 l in 24 hours  
Page
Set Descending Direction
  1. MSZ-FH25VE(2)

    The F Series is designed for optimum cooling/heating performance as well as operational comfort. Quiet, energy-saving operation is supported by some of Mitsubishi Electric’s latest technologies. Advanced functions such as “3D i-see Sensor” temperature control and the Plasma Quad air purifcation system raise room comfort levels to new heights.
    Add to List
    Cooling capacity
    2.50 kW
    Energy Efficiency Ratio (EER)
    5.15 EER
    Annual energy consumption
    96.00 kWh/a
    EU energy label
    A+++
  2. TESY Modeco Classic GCV 6 S 80 47 20 C21 TSR CP

    Electric water heater Modeco Clasic with a heat exchanger
    Add to List
    Storage capacity
    79.00 l
    Losses in per 10 l in 24 hours
    1.00 kWh/d
    Energy demand (EN60379)
    2.00 kWh/d
    EU labelling
    B
  3. SHZ 80 LCD

    The SHZ LCD series of wall mounted water heaters combines a constant supply of hot water with a high level of efficiency. Three ECO programs mean that efficiency and DHW heating can be adjusted precisely to suit individual requirements. ECO COMFORT mode reduces the temperature automatically to 60 °C. ECO PLUS also reduces the charging level so that only part of the cylinder content is maintained at the required temperature. This is especially useful when only a little hot water is required at a time. The ECO DYNAMIC function enables automatic, intelligent matching to the individual draw-off behaviour. All factory settings are initially configured directly on the digital user interface and are then retained. In addition, the backlit LCD indicates the amount of hot water available, the energy consumption, the temperature currently programmed, and other information concerning the current operating status.
    Add to List
    Storage capacity
    80.00 l
    Losses in per 10 l in 24 hours
    0.67 kWh/d
    Energy demand (EN60379)
    6.62 kWh/d
    EU labelling
    B
  4. TESY EV 9S 200 60

    Floor standing storage tanks with a heat exchanger
    Add to List
    Storage capacity
    200.00 l
    Losses in per 10 l in 24 hours
    1.40 kWh/d
    Energy demand (EN60379)
    2.00 kWh/d
    EU labelling
    B
  5. Vaillant VIH R 2000/6

    Domestic boiler cylinders
    Add to List
    Storage capacity
    200.00 l
    Losses in per 10 l in 24 hours
    1.00 kWh/d
    Energy demand (EN60379)
    0.74 kWh/d
    EU labelling
    B
  6. DEM 100 Comfort EL variowall

    AEG closed wall storage tank DEM 100 EASY hot water wall storage tank in a new design for any desired hot water supply. Closed (pressure-resistant) to supply several outlets. Installation also in conjunction with plastic pipe systems (observe manufacturer's instructions and limits of application). Steel inner container with special enamelling, protective anode, thermal insulation with low heat loss. Heating flange single circuit operation. The water content is controlled depending (depending on the selected connection) at the set temperature. Stepless temperature setting from approx. 35 to 80 degrees C possible. Automatic frost protection, replaceable stainless steel heating flange. Quality and safety signs: VDE / GS mark. Capacity 100 l Electrical connection 1 / N / PE 230 V AC Rated power 2 kW Temperature setting range 35 to 80 degrees C Mixed water quantity of 40 degrees C 186 l Operating mode Single circuit Standby energy consumption 0.97 kWh / 24 h Anode Mg (DIN 4753) Degree of protection IP 25 Height / Width / Depth 1015/510/520 mm Weight empty 33 kg Weight filled 133 kg
    Add to List
    Storage capacity
    100.00 l
    Losses in per 10 l in 24 hours
    0.83 kWh/d
    Energy demand (EN60379)
    12.51 kWh/d
    EU labelling
    C
  7. RCNE 365 E40X

    RCNE 365 E40X
    Add to List
    Energy Efficiency Ratio (EER)
    21.35 EER
    Annual energy consumption
    174.00 kWh/a
    Capacity
    314.00 l
    Cooling capacity
    0.20 kW
    Mode
    Cooling & freezing
    EU energy label
    A+++
  8. MSZ-FH35VE(2)

    The F Series is designed for optimum cooling/heating performance as well as operational comfort. Quiet, energy-saving operation is supported by some of Mitsubishi Electric’s latest technologies. Advanced functions such as “3D i-see Sensor” temperature control and the Plasma Quad air purifcation system raise room comfort levels to new heights.
    Add to List
    Cooling capacity
    3.50 kW
    Energy Efficiency Ratio (EER)
    4.27 EER
    Annual energy consumption
    138.00 kWh/a
    EU energy label
    A+++
  9. ELDOM 120 water heater

    ELDOM 120 Mixed cylinder: one heat exchanger + electric resistance ELDOM water heaters are produced in a wide range with capacities ranging from 80 liters to 500 liters.    They are designed to produce domestic hot water (DHW).    water heaters have the following features:      • are made of quality steel inside;      • the heating source is mixed: electric (resistance with nominal power of 1.5 - 2 - 3 kW) and heat exchanger (connected to a hot water boiler) thermal insulation of injected polyurethane;
    Add to List
    Storage capacity
    120.00 l
    Losses in per 10 l in 24 hours
    1.00 kWh/d
    Energy demand (EN60379)
    1.50 kWh/d
    EU labelling
    B
Page
Set Descending Direction