Solar thermal collectors

Filter
  1. Country Ukraine Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. ARMECOFUEL 1 item
  2. Allsolar 1 item
  3. Ariston 1 item
  4. Astersa 5 items
  5. BIAWAR 1 item
  6. BUDERUS 5 items
  7. Bosch 2 items
  8. Centrometal 1 item
  9. ECONRG 4 items
  10. Ejai Solar 21 items
  11. Freenergy 1 item
  12. Guangdong Tianzi Green Energy Technology Co. 9 items
  13. Hewalex 1 item
  14. Hoval 3 items
  15. Huch EnTEC 1 item
  16. Jiaxing Carrefour New Energy Co., Ltd. 1 item
show more show less
Thermal efficiency  
Page
Set Descending Direction
  1. Solar thermal collectors EFK8250

    Inlet / outlet - DN22 copper tube with DN32 threaded connection. The collector houses a copper tube of 8 mm with 12 sections, laser-soldered to the absorber, divided into 96 parts for better heat transfer. The design and structure of the copper pipeline in the collector are made in such a way as to achieve a doubling of the pipeline length in order to increase the heat removal. Extruded aluminum body with glued special tempered transparent glass Solar Glass, 3.2 mm thick with low iron content. Insulation of the rear wall 40 mm mineral wool. High performance combined with long service life. 10-year product warranty excluding glass breakage. Fast installation, thanks to the integrated threaded connections. Collector for vertical installation. Under the order horizontal installation is possible.
    Add to List
    Type of technology
    Flat solar collector premium ECONRG EFK-8250 with aluminum absorber, vertical connection
    Size of colector
    Length - 2150 mm; width - 1170,0 (mm); thickness - 83,0 (mm)
    Thermal efficiency
    81.10 %
  2. Vitosol 100-F SH1B

    Vitosol 100-F SH1B
    Add to List
    Type of technology
    Flat collector
    Size of colector
    2.32
    Thermal efficiency
    75.40 %
  3. Ф58 х 1800 х 48

    Regular Solar Water Heater With Integrated Hot Water Storage Tank. Non-Pressurized (Open-type) Solar Collector, 48 tubes
    Add to List
    Type of technology
    Evacuated Tube
    Size of colector
    4.06
    Thermal efficiency
    75.40 %
  4. YYJ-R012-15

    Regular Solar Water Heater With Integrated Hot Water Storage Tank. Non-Pressurized (Open-type) Solar Collector, 10 tubes
    Add to List
    Type of technology
    Evacuated Tube
    Size of colector
    1.78
    Thermal efficiency
    75.00 %
  5. Ф58 х 1800 х 36

    Regular Solar Water Heater With Integrated Hot Water Storage Tank. Non-Pressurized (Open-type) Solar Collector, 36 tubes
    Add to List
    Type of technology
    Evacuated Tube
    Size of colector
    3.05
    Thermal efficiency
    75.40 %
  6. Solar thermal collectors Vitosol 300-TM (Viessmann), type SP3C

    Vacuum tube collectors Vitosol 300-TM, type SP3C, 1.26 m2 with 10 vacuum tubes. Each vacuum tube has a built-in absorber with a highly selective coating. The absorber provides a high level of absorption of solar energy and a low level of radiation of thermal energy. The absorber has a heat pipe filled with evaporating liquid. The heat pipe is connected to the condenser. The condenser is located in a Duotec two-pipe heat exchanger made of copper.
    Add to List
    Type of technology
    Vacuum tube collectors Vitosol 300-TM, type SP3C, 1.26 m2 with 10 vacuum tubes. Each vacuum tube has a built-in absorber with a highly selective coating
    Size of colector
    Length - 885 mm; width - 2241 (mm); thickness - 150,0 (mm)
    Thermal efficiency
    79.00 %
  7. Vitosol 100-FM SV1F

    Solar Flat panel collector for DHW/heating support
    Add to List
    Type of technology
    Panel solar collector
    Size of colector
    2.3
    Thermal efficiency
    75.10 %
  8. auroTHERM VFK 125/3

    Solar Flat panel collector for DHW/heating support
    Add to List
    Type of technology
    Panel solar collector
    Size of colector
    2.35
    Thermal efficiency
    75.00 %
  9. Flat solar collector Logasol SKN4.0

    Logasol SKN4.0 solar collector has a sleeve for installing a temperature sensor and can be used as a lead collector. The connection technology allows for simple and reliable connection of collectors without the use of additional tools directly at the installation site. TÜV-tested connectors are designed for long-term operation under loads up to 170 ° C and a pressure of 6 bar. The frame of the Logasol SKN4.0 solar collector is made in the form of a one-piece housing made of fiberglass reinforced plastic. The insulation is made of high temperature resistant mineral wool 50 mm thick. Copper tubes with a small coolant volume and low pressure losses quickly and effectively respond to changes in the intensity of solar radiation.
    Add to List
    Type of technology
    The solar collector system works according to the principle whereby the hot heat carrier transfers the generated heat through the connecting pipes to the consumer’s heat exchanger (tank), where it heats the heating circuit of the house and returns it back to the collector.
    Size of colector
    Length -2083 mm; width - 1181 (mm); thickness - 87,0 (mm)
    Thermal efficiency
    77.00 %
Page
Set Descending Direction