Solar thermal collectors

Filter
  1. Country Belarus Remove this item
Clear all
Country  
Category  
Technology  
Manufacturer  
  1. ARMECOFUEL 1 item
  2. Allsolar 1 item
  3. Ariston 1 item
  4. Astersa 5 items
  5. BIAWAR 1 item
  6. BUDERUS 5 items
  7. Bosch 2 items
  8. Centrometal 1 item
  9. ECONRG 4 items
  10. Ejai Solar 21 items
  11. Freenergy 1 item
  12. Hewalex 1 item
  13. Hoval 3 items
  14. Huch EnTEC 1 item
  15. Jiaxing Carrefour New Energy Co., Ltd. 1 item
  16. KBB Kollektorbau GmbH 3 items
show more show less
Thermal efficiency  
Page
Set Descending Direction
  1. YYJ-R012-20

    Regular Solar Water Heater With Integrated Hot Water Storage Tank. Non-Pressurized (Open-type) Solar Collector, 10 tubes
    Add to List
    Type of technology
    Evacuated Tube
    Size of colector
    2.62
    Thermal efficiency
    75.00 %
  2. Vitosol 200-F SH2D

    Vitosol 200-F SH2D
    Add to List
    Type of technology
    Flat collector
    Size of colector
    2.32
    Thermal efficiency
    82.40 %
  3. Solar collector S-Ex 219

    Solar collector with the highest efficiency on the market, 82.4%, 15-year warranty, manufactured in EU. Stagnation temperature of 143 deg. C
    Add to List
    Type of technology
    Flat collector
    Size of colector
    2.19
    Thermal efficiency
    82.00 %
  4. Solar collector KBB K423 DH AR

    Flat collector with anti-reflective glass for horizontal, vertical, slanted roof, flat and facade installation
    Add to List
    Type of technology
    Flat collector
    Size of colector
    2.30
    Thermal efficiency
    83.90 %
  5. KS2000TP

    Flat plate solar collector KS2000 TP is an uncompromised solution in terms of construction and parameters among flat plate collectors. The absorber is made entirely of copper (Cu-Cu) and welded with ultrasonic welding. High efficiency is achieved through highly selective coating (PVD), glass providing high permeability to solar radiation U1 and full thermal insulation of the casing.
    Add to List
    Type of technology
    Flat collector
    Size of colector
    1.827 m2
    Thermal efficiency
    80.20 %
  6. auroTHERM VFK 135/2 VD

    Solar Flat panel collector for DHW/heating support
    Add to List
    Type of technology
    Panel solar collector
    Size of colector
    2.35
    Thermal efficiency
    78.50 %
  7. VT-58-350

    Capacity: 281L Category: Open (Unconfined) Numbers of tube: 24 tube Effective areas of solar thermal collector: 2.32m²
    Add to List
    Type of technology
    Evacuated Tube
    Size of colector
    2.32 sq. meter
    Thermal efficiency
    80.00 %
  8. Flat solar collector Logasol SKN4.0

    Logasol SKN4.0 solar collector has a sleeve for installing a temperature sensor and can be used as a lead collector. The connection technology allows for simple and reliable connection of collectors without the use of additional tools directly at the installation site. TÜV-tested connectors are designed for long-term operation under loads up to 170 ° C and a pressure of 6 bar. The frame of the Logasol SKN4.0 solar collector is made in the form of a one-piece housing made of fiberglass reinforced plastic. The insulation is made of high temperature resistant mineral wool 50 mm thick. Copper tubes with a small coolant volume and low pressure losses quickly and effectively respond to changes in the intensity of solar radiation.
    Add to List
    Type of technology
    The solar collector system works according to the principle whereby the hot heat carrier transfers the generated heat through the connecting pipes to the consumer’s heat exchanger (tank), where it heats the heating circuit of the house and returns it back to the collector.
    Size of colector
    Length -2083 mm; width - 1181 (mm); thickness - 87,0 (mm)
    Thermal efficiency
    77.00 %
  9. Flat vacuum collector TS400H

    It is a new type of flat, high-efficiency solar collector with vacuum insulation. The collector's bathtub is pressed from a sheet of corrosion-resistant aluminum-magnesium gold. The coupling with quick couplings eliminates the use of soldering, screwing and other labor-intensive standard pipe assembly technologies.
    Add to List
    Type of technology
    Flat collector
    Size of colector
    1.84
    Thermal efficiency
    80.50 %
Page
Set Descending Direction